![]() Scaled internally, no further adjustments required. RSSI_TYPE = 3 digital receiver protocols’ signal quality or dropped packets information (SUMD / ST24 /FPort) RSSI_CHAN_LOW PWM value the radio receiver will output when the signal is the weakest. RSSI_CHAN_HIGH PWM value the radio receiver will output when the signal is the strongest. RSSI_CHANNEL Channel number the radio receiver will use to embed RSSI if collective / sum signal is used (channel 5 and up). RSSI_TYPE = 2 PWM Channel type RSSI embedded in a collective PPM / sum signal (sBus) ![]() RSSI_PIN_LOW voltage received on the RSSI_ANA_PIN when the signal is the weakest. RSSI_PIN_HIGH voltage received on the RSSI_ANA_PIN when the signal is the strongest. This parameter defaults to the correct pin number on most boards when using current chibios firmware. RSSI_ANA_PIN specifies the pin used to read RSSI voltage. RSSI_TYPE = 1 Analog voltage type RSSI fed to a dedicated pin ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |